Eton got things right with their FRX3 Solar/Battery/Handcrank Charger. As soon as I saw it at their booth, I pulled out my iPhone and wanted PROOF that it would charge it. So many chargers had claimed to work with the iPhone that I really didn’t believe it would.

They gladly let me try it out.

It worked easily and the reason is quite ingenious.

Instead of depending on the user to crank the handle at the PERFECT speed to provide power to the iPhone, the Eton charges the iPhone with its battery. When you need to charge your iPhone, you must crank up their battery FIRST and then it will charge your phone without any problems.

Additionally, it can trickle charge the battery with its solar panel on the top, using an electrical outlet and with AAA batteries. I was really impressed with all the options available.

Here is a video of me attaching my phone to the charger.

It’s a good looking unit that comes in both black and red.

There is also a radio and a flashlight included, so it doubles as a great emergency tool.

They are going to retail for only $60 bucks, but there was no word on how soon they would be available. Until then, I’m checking the Eton website every few weeks to see if I can buy it.

• FRX3 Solar/Battery/Handcrank Charger

Hak5 did a FULL booth tour here:

You can see a video of it here:

I have been using Powertech’s EZ GO Travel Outlet for the last few months and it has been a very reliable charger. The USB ports aren’t able to power my iPad, so I have to plug in the charger to one of the outlets, but other than that, it has been wonderful. I love that the cord is long enough to reach behind the nightstand in the hotel. That is one thing I DON’T like about this new Ultra Slim Charger. Without a cord, it makes me leave my iPhone, iPad and other things that need charging near the outlet. Sometimes nothing can beat a good old extension cord.

• 13-Year-Old Makes Solar Power Breakthrough by Harnessing the Fibonacci Sequence | Inhabitat – Green Design Will Save the World

After studying how trees branch in a very specific way, Aidan Dwyer created a solar cell tree that produces 20-50% more power than a uniform array of photovoltaic panels. His impressive results show that using a specific formula for distributing solar cells can drastically improve energy generation. The study earned Aidan a provisional U.S patent – it’s a rare find in the field of technology and a fantastic example of how biomimicry can drastically improve design.

It makes sense that a tree design would be able to capture more sun than a flat surface would be. With solar panel “leaves” facing all different directions, they are more likely to be facing the sun at different times of the day. Now, if only we could allow the solar “leaves” to rustle in the wind, they would be even MORE efficient.

I’m very excited to see where this technology leads in the future!

It has been a godsend to us because she is slowly dying, but she still loves to cuddle at night, kneading on my shoulders and back with loud purrs. As long as she is able to do that, Mike and I are going to keep dosing her with medicine and fluids to keep her alive.

Maggie has given us such joy that now that it finally has come to the end of her life, we feel that we should do everything that we can do to make her comfortable. She is nearing the end and soon we will have to make a decision, but until then, these stairs have made the difference between a nightly snuggle and a kitty hiding under the bed.

Maggie may not be able to cuddle me like this for very much longer, but as long as she can get up the doggie stairs, I will do my best to keep her alive.

It looks like Sunbeam doesn’t make shavers anymore. I always find it fascinating when companies stop making products after DECADES in the industry. The Shavemaster was introduced in 1936 and Sunbeam continued making shavers until the 1970′s. After forty years of making a product, they stopped.

Here is an old ad from the 1970′s for the Shavemaster:

I’ve gone through about five different cases in less than a year of owning an iPad. Apple’s case is thin and lightweight, but has ugly seams and sharp edges. Most of the others are so thick they double the iPad’s thickness. This new entry from inCase is my favorite so far.

The Convertable Magazine Jacket is loosely based on InCase’s leather Book Jacket for iPad, one of the cases I ruled out because it adds far too much weight and thickness to the iPad. By contrast, the Magazine Jacket is thin—it’s the only case I’ve reviewed that can be considered as thin and lightweight as Apple’s case.

The Magazine Jacket functions as a cover for the iPad, complete with a Moleskine-like fabric band to keep the cover closed. It easily snaps onto the iPad, and the plastic corner mounts offer some protection if the iPad is dropped. It’s very slim, with two plastic protrusions on the back (which facilitate use as a stand) the only thing making it significantly thicker than an un-jacketed iPad.

InCase advertises “One working position and two viewing positions” when using the Magazine Jacket as a stand. I had trouble figuring out what these positions were at first, and the drawings on the package left both Laura and I scratching our heads. After half an hour of experimentation, we figured it out.

The “working” position, shown at the top of this article, works well for typing. The cover folds into a triangle and supports the iPad at a low angle, slightly lower than that of the Apple case. It works great for typing on a table but isn’t completely stable when used on my lap.

The first “viewing” position, shown at right, uses the same triangular fold, which nestles under one of the case’s protrusions for a very stable TV-like viewing angle, slightly leaning from the vertical. This configuration can also be used in portrait mode, which positions the iPad vertically.

The second “viewing” position, shown at left, was hard to figure out—in fact, I just tried it again for this picture and it took a moment to find the position again. The cover folds into an L-shape and rests on the second protrusion on the back. This is a shallower angle that works well on my desk. It’s probably the least stable position, but still works for light typing.

The great thing about this case, once you figure it out, is the ease of switching positions. I previously used a Macally Microfiber Case which was so difficult to put into position as a stand that I almost never did. With the Magazine Jacket I can switch it from stand to cover and back very quickly, and as a cover it’s sleek and comfortable to use.

This case is hard to find right now at most stores, but it’s available in the Apple Store for $49.95.

I’m impressed with how Red Box has taken the polar opposite business model of Netflix. Instead of offering you EVERY movie with a delay in the mail, Red Box gives you the most popular twenty movies at every convenience store in the city. Both methods of business are profitable and it’s surprising to me to know that there is room in the market for both.

Photo via: Inside The Redbox | Official Website of Thom Allen

It all looks awesome until you realize that it costs a hundred bucks.

I’ve been using the small version of this rake and pan scooper set for the last eight years. I never have to touch the waste because I dump it in a small garbage can lined with a grocery bag. It’s not as high tech as the Pooch Power Shovel, but it cost me less than a third of what the Pooch Power Shovel costs.

Inventive Ingenuity is a wonderful thing, but only when there is a NEED. Necessity is the mother of invention has long ago been abandoned. The Pooch Power Shovel may be a cool way to remove pet waste, but it is a far cry from the simplicity of a rake and shovel.

Via: Electric Pooper Scooper: The Pooch Power Shovel | CraziestGadgets.com

• xkcd: Laser Pointer

If you have never played with a cat and a laser pointer, now is the time to try it out. Here are a couple of good and inexpensive ones:

• Red Laser Pointer Classic Style with Carrying Case at Amazon.com
• American Science & Surplus Red Laser Pointer With Case and Batteries at Amazon.com

LED replacement bulbs are expensive, retailing for about $60 compared to the $2 cost of a typical light bulb. But LED bulbs last 50 times as long as conventional bulbs, and they use 1/8th the power. These two factors can lower the lifetime cost of an LED bulb dramatically.

Whether or not LED bulbs make sense for you depends on where you live. In San Diego, where I live, I pay 28¢/KWh for the majority of my power. This means that a typical light bulb costs me $30 per year to operate, whereas an LED bulb costs just $4. I’ll also have to replace that incandescent bulb each year based on normal lifetimes, so in ten years I’ll have paid $320 to operate a normal bulb, but just $100 to operate an LED bulb. That’s less than 1/3rd the price overall. Over the 50 year lifetime of the LED bulb, it’s 1/5th the price.

However, if you pay 10¢/KWh for power, you’ll never actually recoup the cost of an LED light bulb at $60.

For me, it’s already time to make the switch to LEDs. Your rule of thumb is simple: When LED bulbs cost twice in dollars what you pay for a KW of electricity in cents, it’s time to make the switch. For example, if you pay 15¢ for electricity, LED bulbs make sense at $30 retail.

The current generation of LED lights are not dimmable, and their light is quite directional, so they are best used in recessed ceiling lights rather than in lamps. Also, most LED bulbs cast a cold white glow that people often find to be harsh, so if you like the warm yellow glow of incandescent, make sure you order warm white bulbs with a color temperature below 3500K. Finally, you’ll have to remember to take your LED light bulbs with you when you move, or you’ll lose their cost effectiveness.

In the end, LED lighting has a initial investment that may seem daunting, but can be well worth the investment, depending on your electricity bills. With a little research, you may find a way to save yourself money AND save the planet.